Automatic Saw Submerged arc Flux recovery machine
1. Features for Flux recovery machine:
Flux recovery machine is applicable to various operating machines.
Saw Flux recovery machine can be mount on the horizontal arm of operating machines or sit on the ground.
Submerged arc Flux recovery machine makes use of air pump suction pressure and external (0.4-0.6Mpa) gas source to realize the recycling collection delivery of flux.
Flux recovery machine is equipped with material level control system,when there is shortage of welding flux,
Saw Flux recovery machine will have an automatic alarm.At this time you need to add the flux into machine.Under different welding needs,through the discharge valve on the bottom you can replace different types of flux at any time.When we carry out automatic dust removal,we only need to open the valve periodically to make emissions of dust.
Submerged arc Flux recovery machine is environmentally friendly equipment.
Flux recovery machine is equipped with buckets with different sizes which can be fitted in different sizes of barrels;
Saw Flux recovery machine can be welded inside the barrel with the minimum diameter of 300mm.Heating system can be added on request.
This model has LTHS100E1 and LTHS100E2 two types,E2 is an upgraded version of E1.On this basis of the original function it makes use by PLC control and makes the whole process of welding flux recovery,transmitting and feeding achieve complete automation.When you replace work piece we need not shutdown machine.
2. Technical parameters for Flux recovery machine:
|Horizontal recovery distance||10-15m|
|Vertical recovery distance||5-7m|
|Volume of aborting flux||8-15kg/min|
|Air source pressure||0.4-0.6Mpa|
|Horizontal transmission distance||8-25m|
|Material transmission volume||2-20kg/min|
|Exterior dimension(L x W x H)||1100 x 500 x 1400mm|